mandag 9. november 2015

DV4Mini USB..

So, I'm up and running with DV4Mini anc DV4Mini Control Center v1.61

I'm running it on a Raspberry Pi 2.
Working OK, but it seems like the Pre-build image for this is not surviving a Network outage.
If the WLAN is rebooted, the Pi 2 is available after the boot but DMR+ is not working anymore.

A few tips to configure Pi 2...

This is a automated script to configure x11vnc with access to Console :0 of the Pi:
wget http://goo.gl/MbfUEp -O isx11.sh
sudo bash isx11.sh

To change the resolution from VGA:
Configure resolution in /boot/config.txt

# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1

# uncomment to force a specific HDMI mode (this will force VGA)
hdmi_group=2
hdmi_mode=16
This will set 1080p

Also, if you want to make sure to startup in correct mode after reboot, the DV4Mini config file is here:
DV4Mini config file on Raspberry:
/root/.config/dv4mini/dv4mini/1.0.0.0

My DMR radios are TYT DM-380 and a Hytera PD-365.
Both radios works perfect with DV4Mini USB.




Ingen kommentarer:

Legg inn en kommentar